I Had The Right Concepts – Optimized Model Proving More

While doing some setup and swing work today, I was struck by the concepts I’ve advanced over past years with the MCS Golf Swing model coming back into play with the optimized swing model.

I’ve been focusing on the Classic Golf Swing pivot this week because it’s the first version of the pivot model that I will be demonstrating with the pivot drills, and on the down swing, the concepts were falling into place.

1. The first was the Gravity Drop – I’ve always had a pretty good gravity drop from the top, but I am still marveling at how much leverage from the weight transfer and gravity do most of the work on the transition and beginning of the down swing.


The above gif. of a clip from my video “MCS – Dropping The Hammer” back in early 2017 shows how purely you can get that gravity drop from the top using just the weight transfer to the leading foot from the top of the back pivot.

You really are, in essence, dropping the hammer and not forcing it down or swinging it.  Just as I use the gravity drop in yet another gif. from that video:


I showed that by merely pinching the club between my thumb and forefinger, all that was needed to swing the iron in my hand was to let it drop about halfway down with just gravity until it began to release.

You see pretty good club head speed through the bottom without even using any wrist action.

2. Then we have what I talked about in a later video, the “Drop & Pop,” which is where you add to the work gravity is doing.

You are leveraging the hands down with your weight transfer, adding speed to the natural drop and keeping the club from releasing until it reaches the halfway down mark.

At that point the wrists activate to keep the club accelerating downward to the swing bottom.

I showed how you want to swing with a dual purpose – to swing as if you’re hitting a wall or impact bag at the bottom, and here below, I’ve stuck a tee into the ground to stop the club in the same manner:


… and to also swing down as if there isn’t a wall or barrier at the swing bottom.

If that sounds confusing, I can re-phrase it – you want to swing down with a full weight transfer and with leveraging so that you would smack that impact bag in a powerful impact position like above, but also in a position where if you removed the impact bag or wall:


… you’d swing down and through that bottom without having to worry about straining or twisting anything.

You see the Modern Golf Swing instructors coaching how to swing into impact bags, but because they only set up to hit the impact bag and don’t take into account that in an actual swing, the club doesn’t stop.

That is why you see the complete breakdown through the swing bottom where modern swingers get there and then everything goes haywire.  Jumping feet, twisting feet, spinning on the heel, all sorts of things because they only practice hitting impact bags without taking into account the release, follow-through and finish.

You’ll notice something else as well when you look at all of the gif.s above – for a proper swing motion, you want a stable head position and I do a pretty good job even while talking and demonstrating the concepts, of keeping that head stable.

It’s all about the setup and the pivot action.  Once you’re at the top, you have done nearly all of the work required to perform a swing.

The rest of it – the transition, down swing, impact and release, the follow-through and finish, are natural progressions from the work you’ve done to get to the top.

Leave a Reply